A rotary hammer, also known as a demolition hammer, is an electric tool widely used in construction and renovation industries for drilling into and demolishing hard materials such as concrete and masonry. Using a rotary hammer correctly not only improves work efficiency but also ensures the safety of the operator. Here is a safe guide to using a rotary hammer:

1. Understand the Rotary Hammer

Before starting, familiarize yourself with the structure, functions, and operating methods of the rotary hammer. Read the user manual to understand its technical parameters and applicable scope.

2. Inspect the Tool

Before use, check if the rotary hammer is intact, including the power cord, switch, drill bit, chuck, and other parts. Ensure there is no damage or wear to prevent malfunction during use.

3. Wear Protective Equipment

When operating a rotary hammer, you must wear appropriate protective equipment, including a hard hat, safety goggles, earplugs or earmuffs, a dust mask, and durable gloves.

4. Choose the Right Drill Bit

Select the drill bit with the appropriate diameter and material for the material you need to drill. For example, a special concrete drill bit should be used for drilling into concrete.

5. Secure the Workpiece

Before drilling, ensure the workpiece is stable and secured to prevent movement or vibration during operation.

6. Begin Operation

Before starting the rotary hammer, align the drill bit with the intended drilling position, then slowly start the rotary hammer, gradually increasing the pressure until the drill bit fully enters the material.

7. Operating Techniques

Maintain Stability: Hold the rotary hammer firmly with both hands and keep your body stable during operation.

Apply Even Force: Apply force evenly to avoid sudden force that could cause the drill bit to break or damage the workpiece.

Observe Feedback: Pay attention to feedback from the rotary hammer, such as sound and vibration, and adjust your operation in time.

8. Safety Precautions

Avoid Body Contact: During operation, avoid contact between other parts of your body and the rotary hammer to prevent accidental injury.

Prevent Electric Shock: Ensure the power cord is away from water sources and avoid using the rotary hammer in damp environments.

Emergency Stop: In case of an emergency, press the emergency stop button immediately.

9. Cleaning and Maintenance

After use, clean the rotary hammer to remove dust and debris from the drill bit. Regularly inspect the parts of the rotary hammer and lubricate or replace worn parts as necessary.

10. Storage

Store the rotary hammer in a dry, ventilated place, avoiding direct sunlight or exposure to damp environments.

By following these guidelines, you can ensure the safe use of the rotary hammer and improve the quality and efficiency of your work.